Wing spars bolted on

Fuselage, spars

The aft fuselage required lots of trimming to get the aft spar inserted.

Stacking the main spar

Started stacking up the main wing spar. I definitely need some more and longer sheet holders. Even the 1/2 inch is too small. I have to order these, and leave the main spar for the time being after I have deburred the edges etc. 

Aft outer spars and main inner spar

Finished outer aft spars. Started on main inner spar.

The other outer spar

There was too few 470 5-9 rivets. If it is an error from Sonex or if ACS has put a finger on the scale I don't know. Luckily I have a rivet cutter so I took a few 5-16 rivets and cut them to correct size.

Outer wing spar

Riveted the outer wing spar.

The other one is primed and left to dry overnight. Started with the aft spars. Deburred and bent the flange to correct angle.

Left outer spar updrilled

Updrilled the right outer spar

Rather straight forward, but I wish I had the Drill Doctor when I reached the steel. I hope I stacked them right though.