Sunday, February 12, 2017

Inner wing ribs and skin

Bolted/riveted on the inner wing ribs and started trimming the inner wing skins. The inner wing ribs was finished from some time ago.Lots of crashes rivets vs bolts and similar. I need to make several new holes on the trailing edge. Also the wing bolt handle clip needs to be shifted further outward and further in. This will require a piece of skin doubler.

To get room to drill and rivet, the landing gear has to be removed. Luckily I have the AirWard removable wind shield kit, or this would be a real PITA.

No comments: